The Low and Mid-Rise Housing Reforms – Phase 2 launches in NSW, with key changes taking effect from 28 February 2025. The reforms expand planning provisions for dual occupancies, terraces, multi-dwelling housing, and residential flat buildings in designated areas. New non-discretionary standards streamline approvals, overriding local planning controls.
With the recent amendment to the State Environmental Planning Policy (Housing) 2021, NSW Government is committed to reaching the National Housing Accord target of 377,000 homes by mid-2029. In order to achieve this, the Minns Government is holding local and state governments accountable through a range of performance measures. The Housing SEPP amendment has brought …
In alignment with the National Housing Accord and following on from the proposal for low- and mid-rise reforms that went on exhibition from 15 December 2023 to 23 February 2024, NSW Government has introduced new amendments to the State Environmental Planning Policy (Housing) 2021. The aim of these reforms is to increase supply of low-rise …
Today, the Department of Planning and Environment placed on exhibition a document to help accelerate housing delivery in NSW. This document suggests some changes to the low rise housing diversity code that impacts dual occupancies, manor houses and terraces but also brings in multi dwelling housing, residential flat buildings and shop top housing; all of …
Continue reading “Introducing the Mid Rise Housing Diversity Code”
NSW Government’s Construct NSW strategy aims to restore consumer confidence by focusing on reform in 6 key areas of the building and construction industry. These include regulation, ratings, education, contracts, digital tools, and data and research. Led by the Office of the Building Commissioner (OBC), the changes will affect all building classes and stakeholders, including …
Continue reading “NSW Government ambitious plan to transform building industry”
In the wake of recent natural disasters and COVID-19, the NSW Government is committing to a plan that will see the revival of regional NSW.
A new approach to rezonings in NSW is here. Read more from es.au.
In working towards a net zero target by 2050, NSW Government has proposed an increase to BASIX standards for new residential buildings.
Following the Building Ministers’ Meeting (BMM) that took place on 30 April 2021, a consensus to include minimum accessibility provisions in the National Construction Code (NCC) 2022, was reached.
Following a recent Independent Commission Against Corruption (ICAC) Inquiry (Operation Dasha), the NSW planning department is exhibiting an Explanation of Intended Effect (EIE) that seeks to gather public feedback on new measures to improve the planning system.
The City of Parramatta Council has proposed a new Local Environmental Plan (LEP) to consolidate and replace the existing five planning controls that provide the legal guidelines for development and land use.
The Home Building Act 1989 regulates the residential building industry and certain specialist work in New South Wales. It addresses any residential works carried out by contractors and tradespersons, including construction of a new home and renovations or alterations to an existing home or structure.
A new Housing Diversity State Environmental Planning Policy (Housing Diversity SEPP) is likely to have an adverse effect on private developers.
The introduction of the (formerly) Low Rise Medium Density Housing Code in July 2018 aimed to provide more liveable and affordable housing arrangements for growing families and empty nesters within existing neighbourhoods and streetscapes.
For new developments that require local infrastructure and services, Council may collect a developer/local infrastructure contribution to help fund the provision.
While the new process for documenting Performance Solutions is not yet mandatory, practitioners are encouraged to exercise the steps outlined in A2.2(4) from now. The Australian Building Codes Board (ABCB) has put together a guide to assist in this transition.
In a bid to boost community confidence, the NSW Government has introduced a new legislation that aims to tackle ongoing issues with the building of residential apartments.
While many recent changes to legislation in the construction and land development industries have sought to improve the economic effects of COVID-19, a significant amendment to the Environmental Planning and Assessment Regulation 2000 (NSW) (EPA Reg) has seen the barrier to ‘physical commencement’ heightened.
Developers and landowners can breathe a sigh of relief as NSW Parliament introduces new amendments to the Environmental Planning and Assessment Act 1979 (NSW) (EPA Act) that aim to alleviate time pressures in the construction industry.
Since being introduced in 2004, the Building Sustainability Index (BASIX) requirements have set the ground rules for thermal comfort performance and water and energy usage within residential dwellings.
The NSW Government is seeking feedback on a new simplified Housing Code which sets out clear and simple planning rules for works that can be carried out under complying development.
NSW Fair Trading released a new guide to assist home owners and contractors if building work is in dispute.
The NSW Government has announced that the BASIX energy targets will be increased across the State in July 2017.
The General Housing Code is replaced with a new simplified Housing Code which sets out clear planning rules for complying development including one and two storey homes, renovations and extensions.
Experienced planning professionals will lead the panels, which will assess DAs that are sensitive in nature, or where there is a conflict of interest for council or developers.
In light of recent tragedies including Grenfell Tower in London and Lacrosse Building in Melbourne, the NSW Government will soon implement new laws for buildings with combustible cladding.
The NSW Government is making improvements to reinforce the building and certification system and up until 30th October 2018, you can have your say.
The National Construction Code (NCC) is an all-encompassing set of on-site construction requirements put together by the Council of Australian Governments (COAG).
The Low Rise Medium Density Housing Code has been deferred to allow for an independent review.
The introduction of the new Low Rise Medium Density Housing Code in July 2018 aimed to provide more liveable and affordable housing arrangements for growing families and empty nesters within existing neighbourhoods and streetscapes. It has currently been implemented across 82 council areas in NSW and there are plans for the remaining 45 to adopt …
Continue reading “The Low Rise Medium Density Housing Code (MDHC) has been deferred again”
Canterbury LEP 2012 has just been amended (Amendment No 16). Clause 4.1C has been added to the LEP requiring minimum lot sizes and lot widths for Boarding Houses in its Residential Zones.
In line with NSW Government’s plan to deliver a final Design and Building Practitioners Bill 2019 by the end of the year, a draft will be open for public feedback until 16 October 2019. The Bill comes as a response to the April 2018 Building Confidence Report compiled by Professor Peter Shergold and Ms Bronwyn Weir. It …
Continue reading “Draft Design and Building Practitioners Bill 2019”
Currently, builders and tradies insured under the Home Building Compensation Fund (previously known as Home Owners Warranty) are subject to a capped amount of insurance they can purchase each year, restricting the number of projects that can be taken on.
A Review of Complying Development for Inland NSW’ sets out proposed changes to the State Environment Planning (Exempt and Complying Development Codes) 2008 will apply to all residential complying development for 83 local government areas west of the Great Dividing Range.
The Department of Planning and Environment (the Department) is examining opportunities to provide
greater housing choice and better design for medium density housing across NSW.
The department of planning has launched a suite of new online tools to help modernise the planning system in NSW and make it easier for people to access planning information.
The Australian Building Ministers’ Forum agreed in principle to make the 2015 National Construction Code (NCC) and future editions freely available online, significantly contributing to reducing the burden of building regulation.
Swimming pool owners have until the 29th of October 2013 to register their swimming pool, or a minimum fine of $220 (maximum $2,200) may be imposed.
A review of the NSW planning system has taken place. This has resulted in a new planning system for NSW.
The proposed changes to charge for BASIX Certificates put forward in November, 2010 to the Environmental Planning and Assessment Regulations 2000, will come into effect 1st July, 2011.
State Government in an aim to clear up grey areas and combat misuse of SEPP (Affordable Rental Housing) 2009 have enforced the following changes
Part 6 provisions of the EP&A Act to come into effect 1 December 2019
The Environmental Planning & Assessment Act 1979 is a legislation that provides the framework for the use of land in New South Wales. It sets out the laws regarding subdivisions, building, demolition and general changes to the existing built and natural environment.
In 2015, former Treasury Secretary Michael Lambert identified areas of this legislation that needed to be reviewed. He put forward recommendations for reform, most of which came into effect in March of 2018.
Part 6 of this legislation specifically looks at the requirements for building and subdivision certification. Changes to this section looked to simplify certifier accredited legislation as well as the planning system. Though scheduled for a September 2018 start, it’s now been revealed that these changes will come into effect on 1 December 2019, allowing for the Department of Planning, Industry and Environment to spend more time preparing industry stakeholders for the reform.
The new occupation certificate provisions
From 1 December 2019:
- the new OC provisions will remove the distinction in the former framework between interim and final OCs in favour ofone certificate which covers multiple situations
- ‘interim’ and ‘final’ OCs can no longer be issuedfor development consents granted after this date
- an OC can be issued for either ‘part of’ or ‘the whole of a building’, including parts of partially completed buildings. To ensure that a building is not occupied indefinitely under a partial OC issued for part of a partially completed new building, the Regulation now requires that a further OC for the whole building be obtained within five (5) years of the partial OC being issued.
The changes will not apply to development consents or OCs issued before 1 December 2019, including uncommenced deferred commencement consents. Instead, those approvals will remain subject to former building and subdivision certificates (as in force immediately before the repeal of that Part).
The new direction powers for Certifiers
From 1 December 2019:
- the new written directions notice strengthens the powers of private principal certifiers by making certain compliance actions mandatory while providing a process to be followed
- private principal certifiers will no longer be able to issue a notice of intention to give an order
- a private principal certifier must issue a written directions notice in respect of non-compliancesand direct the person responsible for the non-compliance to take specific action to prevent or remedy the non-compliance within two (2) business days
- atemplate for a written directions notice (with all required content/information) will be made available on the Department of Planning, Industry and Environment’s website.
The new subdivision works certificate (SWC)
From 1 December 2019:
- a construction certificate can no longer be used to certify ‘subdivision work’. A construction certificatewill only now certify building work
- a SWC only applies to development consents granted from this date.
Development consents granted prior to this date, including uncommenced deferred commencement consents, will require a construction certificate under the former EP&A Act provisions
- a SWC is different to a ‘subdivision certificate’.A SWC certifies that proposed subdivision work that is completed in accordance with specified plans will comply with the requirements of the regulations. A subdivision certificate authorises the registration of a plan of subdivision under Part 23 of the Conveyancing Act 1919.
- SWC’s do not apply to CDC’s and some crown developments
These changes are expected to improve stringent building and subdivision regulations by streamlining readability, usability and availability of information. Until then, it’s business as usual with building provisions from 1 March 2018 still in force.
